Suche

Volltextergebnisse:

Module "CLT-Plate 1D - Continuous beam"

70 Treffer, Zuletzt geändert: vor 4 Jahren

the considered structural element * definitions of the structural system * definitions of the cross section * input of the loads * informations about fire and vibration parameters A graphical representation of the input data is shown on the right side. This o

Module "Horizontal load distribution on shear walls"

35 Treffer, Zuletzt geändert: vor 4 Jahren

data ===== The input is divided into: * input of the position and quantity of acting horizontal forces * input of the floor polygon * input of the shear walls * calculation options ==== Horizontal forces ====

Module "Wall"

33 Treffer, Zuletzt geändert: vor 3 Jahren

dimensions and boundary conditions}} The bearing of the wall at the top and bottom edges is hinged an... le, the cross section is defined in the direction of the wall length (vertical cross section) and the width of the cross section cannot be changed. ++++ See Mo... necessary to define an eccentric load application of q_d, the input of e_qd can be

Module "SHERPA CLT-Connector"

21 Treffer, Zuletzt geändert: vor 4 Jahren

a ===== The input is divided into: * selection of the connection type * definition of CLT elements to be connected * selection of screw length * options * depending on the connection type further system specifications * input of loads and design factors ==== Connection type ==

Module "Compression perpendicular to grain"

20 Treffer, Zuletzt geändert: vor 4 Jahren

==== The input is divided into: * definitions of the cross section * definitions of the plate dimensions * input of the loads * type of load configuration * calculation options An option for a quick control of th

Module "Ribbed slab"

20 Treffer, Zuletzt geändert: vor 4 Jahren

the considered structural element * definitions of the structural system * definitions of the cross section * input of the loads * informations about vibration parameters * calculation ... tural system}} ==== Cross section ==== The input of the CLT cross section is the same as for the [[en

Module "CLT-Plate loaded in plane"

11 Treffer, Zuletzt geändert: vor 4 Jahren

==== The input is divided into: * definitions of the cross section * specification of parameters concerning structural fire design * internal forces (design values) * definitions of design factors ==== Cross section ==== The input... malink&noheader}} ++++ Fire left / right instead of fire above and below. ==== Internal forces and de

Module „CLT-Plate 1D - Internal forces“

9 Treffer, Zuletzt geändert: vor 4 Jahren

==== The input is divided into: * definitions of the cross section * specifications concerning s... sign * internal forces according to the theory (of 1^st or 2^nd order) on which ... m#fire&inline&permalink&noheader}} ++++ ==== Type of calculation, internal forces, design factors and ... ==== The internal forces and the underlying type of calculation are defined in the tab „Internal forc

Module "Stiffness matrix"

5 Treffer, Zuletzt geändert: vor 4 Jahren

s matrix ==== ++++ Determination and description of the single components | {{page> clt:design:stiffn... and torsion}} === Shear for CLT-plate loaded out-of-plane === {{ en:clt:hotspot:software:cltdesigner... ebene.png |Stiffness matrix - Parts for shear out-of-plane}} === In-plane Stiffness values === {{ en... trizitaeten.png |Stiffness matrix - Consideration of eccentricity}} ==== Export possibilities ==== By