Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:clt:hotspot:software:cltdesigner:manual [2024/10/10 15:36] – [Modules] Alexandra Thiel
+++ en:clt:hotspot:software:cltdesigner:manual [2024/10/10 18:12] (aktuell) – [Buttons] Alexandra Thiel
@@ Zeile 105: / Zeile 105: @@
 [[en:clt:hotspot:software:cltdesigner:manual:modul_webplate|{{clt:hotspot:software:cltdesigner:manual:button_hohlraumdecke.png?100|}}]]
 </WRAP>
-The **[[en:clt:hotspot:software:cltdesigner:manual:modul_webplates|Module „Web plates“]]** offers the required verifications for the ultimate limit state (ULS) with respect to bending and shear for permanent and transient loads, and the verifications for the serviceability limit state with respect to deflection and vibrations according to EN 1990 or EN 1995 for web plates made of glued ribs and two-layer timber panels.
+The **[[en:clt:hotspot:software:cltdesigner:manual:modul_webplate|Module „Web plates“]]** offers the required verifications for the ultimate limit state (ULS) with respect to bending and shear for permanent and transient loads, and the verifications for the serviceability limit state with respect to deflection and vibrations according to EN 1990 or EN 1995 for web plates made of glued ribs and two-layer timber panels.
 </WRAP>
@@ Zeile 153: / Zeile 153: @@
 ==== Buttons ====
-{{clt:hotspot:software:cltdesigner:manual:prefsinfohelp_buttons.png|Settings/Preferences, Information and Help}}
+{{clt:hotspot:software:cltdesigner:manual:button_groups.png?253|Settings/Preferences, Information and Help}}
-A window with [[#Settings/Preferences|settings/preferences]] will open by clicking on the left button in the first series of buttons, another window with [[#information]] about the CLTdesigner will pop up by clicking on the middle, and help information can be accessed by clicking on the right button.
+The first group (from left to right) consist of **Save**, **Save as ...** and **Generate report** (see [[#Menu bar]]).
-By clicking on one of the buttons in the second series of buttons shown in the following figure, the language can be changed. The current version offers German, English, French, Italian, Spanish and Dutch translations.
+The next button is **Calculate**. The calculation can also be started with the shortcut CTRL+R.
+A window with **[[#Settings/Preferences|settings/preferences]]** will open by clicking on the first button in the next group of buttons, another window with **[[#information]]** about the CLTdesigner will pop up by clicking on the second, **help** information can be accessed by clicking on the third button and **More detailed information on the implemented calculation methods** will be available by clicking on the last button.
+By clicking on one of the buttons in the second series of buttons shown in the following figure, the **language** can be changed. The current version offers German, English, French, Italian, Spanish and Dutch translations.
 {{clt:hotspot:software:cltdesigner:manual:language_buttons.png|Available languages (DE, EN, FR, IT, ES, NL)}}
@@ Zeile 184: / Zeile 188: @@
 Furthermore, here you can specify whether the modulus of elasticity E<sub>90</sub> should be ignored in the calculation.
-{{ en:clt:hotspot:software:cltdesigner:manual:preferences_analysis.png |Preferences - Analysis}}
+In the modules for rib and box cross-sections, it is also possible to select the calculation method for the effective width.
+{{ en:clt:hotspot:software:cltdesigner:manual:preferences_analysis.png?475 |Preferences - Analysis}}
-It is also necessary to specify whether the National Annex should be considered in verification and if so, which one. Furthermore, partial safety factors for the ULS verification need to be specified by selecting either EN, NA or user-defined from a drop-down list. The user also can specify whether the system coefficient k<sub>sys</sub> should be taken into account or not. For the proof of stability, the imperfection coefficient β<sub>c</sub> and the conversion factor mean value to 5% quantile value k<sub>05</sub> as well as the consideration of the shear deformation can be defined here.
+It is also necessary to specify whether the National Annex should be considered in **verification** and if so, which one. Furthermore, partial safety factors for the **ULS verification** need to be specified by selecting either EN, NA or user-defined from a drop-down list. The user also can specify whether the system coefficient k<sub>sys</sub> should be taken into account or not. For the proof of stability, the imperfection coefficient β<sub>c</sub> and the conversion factor mean value to 5% quantile value k<sub>05</sub> as well as the consideration of the shear deformation can be defined here.
 {{ en:clt:hotspot:software:cltdesigner:manual:preferences_verification_uls.png?675 |Preferences - Verification - ULS}}
-The deformation factors (values according to either TU Graz, EN, NA or user-defined), as well as the limit values for deformation need to specified in the "Deformations" tab within the subsection regarding the SLS verification. By ticking the first box, the weight of the plate g<sub>0</sub> will not be considered in calculation of instantaneous deformation w<sub>inst</sub> at t=0. Furthermore, here can be also specified whether the Base Document should be taken into account in deformation analysis or not. Likewise, here is also given an option to neglect short cantilevers in deformation analysis.
+The deformation factors (values according to either TU Graz, EN, NA or user-defined), as well as the limit values for deformation need to specified in the "Deformations" tab within the subsection regarding the **SLS verification**. By ticking the first box, the weight of the plate g<sub>0</sub> will not be considered in calculation of instantaneous deformation w<sub>inst</sub> at t=0. Furthermore, here can be also specified whether the Base Document should be taken into account in deformation analysis or not. Likewise, here is also given an option to neglect short cantilevers in deformation analysis.
 {{ en:clt:hotspot:software:cltdesigner:manual:preferences_verification_sls_deformation.png |Preferences - Verification - SLS - Deformations}}
@@ Zeile 203: / Zeile 209: @@
 ==== Information ====
-The information window includes the contact address, the terms of use, and a button for feedback.
+The **information** window includes the contact address, the **terms of use**, and a button for **feedback**.
-{{ en:clt:hotspot:software:cltdesigner:manual:info.png |Info window}}
+{{ en:clt:hotspot:software:cltdesigner:manual:info.png?600 |Info window}}
 ==== Project information ====
-Project information can be entered by clicking on „Edit | Project information“. Here, a project name and a description of the component to be examined can be inserted. Furthermore, the name of the author or a person in charge can be included. The date of creation, the date of the latest change in the project, as well as the storage location are created automatically.
+**Project information** can be entered by clicking on „Edit | Project information“. Here, a project name and a description of the component to be examined can be inserted. Furthermore, the name of the author or a person in charge can be included. The date of creation, the date of the latest change in the project, as well as the storage location are created automatically.
-{{ en:clt:hotspot:software:cltdesigner:manual:projektinfo.png |Project information}}
+{{ en:clt:hotspot:software:cltdesigner:manual:projektinfo.png?600 |Project information}}