Suche

Volltextergebnisse:

CLTdesigner - Versions and changes @en:clt:hotspot:software:cltdesigner

15 Treffer, Zuletzt geändert: vor 6 Monaten

on on the window\\ - Output of the deflection in mm in the pdf report | |17.08.2011 | 2.1 a | All |- MM 7ss-layups and MOE fixed | |28.02.2012 | 2.2 ... 7.2013 | 3.3 | |- new Derix layups\\ - new MM layups\\ - Bug with dead load and ProjectPrefere... |31.03.2016 | 5.0 | Full version, Hasslacher, MM |- problem with decimal format in case of vibrat

Module "SHERPA CLT-Connector" @en:clt:hotspot:software:cltdesigner:manual

4 Treffer, Zuletzt geändert: vor 4 Jahren

ed). The length of the inclined screws can be 100 mm, 120 mm or 140 mm, depending on requirements. {{ en:clt:hotspot:software:cltdesigner:manual:modul_sherpa_clt... cated via the option "sound insulation layer ≤ 12 mm". {{ en:clt:hotspot:software:cltdesigner:manual:

Module "CLT-Plate 1D - Continuous beam" @en:clt:hotspot:software:cltdesigner:manual

2 Treffer, Zuletzt geändert: vor 4 Jahren

s of each layer has to be within the range of 6.0 mm to 45 mm. In the case of proprietary CLT products, the strength class of lumber and the orientation c... G_r;rho_k;rho_mean;f_v,k,IP;f_T,k;f_m,k,IP\\ ;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;N/mm2;kg/m3;kg/m3;N/mm2;N/mm2;N/mm2\\

CLTdesigner User manual @en:clt:hotspot:software:cltdesigner

1 Treffer, Zuletzt geändert: vor 2 Jahren

rification according to DIN (w_perm ≤ 6 mm), the verification according to suggestion of Ham

Module "Compression perpendicular to grain" @en:clt:hotspot:software:cltdesigner:manual

1 Treffer, Zuletzt geändert: vor 4 Jahren

ossible occurrence of gaps or cracks wider than 1 mm. ==== Load data and design factors ==== The appl