| Both sides previous revision Previous revision Next revision | Previous revisionLast revisionBoth sides next revision |
| en:clt:hotspot:software:cltdesigner:versions [2020/03/25 15:12] – Alexandra Thiel | en:clt:hotspot:software:cltdesigner:versions [2023/10/27 13:21] – Alexandra Thiel |
|---|
| FIXME **This page is not fully translated, yet.** | |
| |
| ====== CLTdesigner - Versions and changes ====== | ====== CLTdesigner - Versions and changes ====== |
| |
| |28.06.2011 | 2.1 | All |- Products Hasslacher\\ - Displaying the storage location on the window\\ - Output of the deflection in mm in the pdf report | | |28.06.2011 | 2.1 | All |- Products Hasslacher\\ - Displaying the storage location on the window\\ - Output of the deflection in mm in the pdf report | |
| |17.08.2011 | 2.1 a | All |- MM 7ss-layups and MOE fixed | | |17.08.2011 | 2.1 a | All |- MM 7ss-layups and MOE fixed | |
| |28.02.2012 | 2.2 | |- Spanish version\\ - Stora Enso and Finnforest removed\\ - Preferred cross sections implemented\\ - Material according approvalsfixed\\ - new layups Haas (Timbory) and Hasslacher\\ - in-plane shear corrected for double layers\\ - national annex DE\\ - User-Preferences established | | |28.02.2012 | 2.2 | |- Spanish version\\ - Stora Enso and Finnforest removed\\ - Preferred cross sections implemented\\ - Material according approvals fixed\\ - new layups Haas (Timbory) and Hasslacher\\ - in-plane shear corrected for double layers\\ - national annex DE\\ - User-Preferences established | |
| |24.08.2012 | 3.0 | |- shear analogy method\\ - vibration verification according to Hamm/Richter and Hamm/Richter mod.\\ - vibration check according to ON B extended by vibration acceleration\\ - layups Haas and Hasslacher updated\\ - new material for Hasslacher according to ETA\\ - user-defined combination coefficients, safety factors and kdef values\\ - Preferences revised | | |24.08.2012 | 3.0 | |- shear analogy method\\ - vibration verification according to Hamm/Richter and Hamm/Richter mod.\\ - vibration check according to ON B extended by vibration acceleration\\ - layups Haas and Hasslacher updated\\ - new material for Hasslacher according to ETA\\ - user-defined combination coefficients, safety factors and kdef values\\ - Preferences revised | |
| |03.01.2013 | 3.0 a | |- Binder removed\\ - Hasslacher material ETA set as default value | | |03.01.2013 | 3.0 a | |- Binder removed\\ - Hasslacher material ETA set as default value | |
| |11.01.2018 | 6.7.2 | Full version, Hasslacher |- Hasslacher layup 5s-150 added | | |11.01.2018 | 6.7.2 | Full version, Hasslacher |- Hasslacher layup 5s-150 added | |
| |11.06.2018 | 6.8 | Full version, all company versions |- optimization of layups\\ - start calculation button in toolbar\\ - Choice of language at first start\\ - calculation of b<sub>ef</sub> for ribbed slabs only when pressing the button\\ - fire: calculation of t<sub>a</sub>\\ - bug shear stress in pdf report fixed\\ - bug with the k<sub>def</sub> values in the settings/preferences fixed\\ - Material Derix-ETA added\\ - k<sub>cr</sub> for shear strength of material EN 338 and EN 14080 considered\\ - ribbed slab - layer wise verification\\ - layups Piveteaubois (HEXA2)\\ - compression perpendicular to grain according to Brandner 2018 | | |11.06.2018 | 6.8 | Full version, all company versions |- optimization of layups\\ - start calculation button in toolbar\\ - Choice of language at first start\\ - calculation of b<sub>ef</sub> for ribbed slabs only when pressing the button\\ - fire: calculation of t<sub>a</sub>\\ - bug shear stress in pdf report fixed\\ - bug with the k<sub>def</sub> values in the settings/preferences fixed\\ - Material Derix-ETA added\\ - k<sub>cr</sub> for shear strength of material EN 338 and EN 14080 considered\\ - ribbed slab - layer wise verification\\ - layups Piveteaubois (HEXA2)\\ - compression perpendicular to grain according to Brandner 2018 | |
| |06.08.2018 | 6.9 | Full version, all company versions |- Bug bei der Ausgabe der Materialparameter behoben\\ - Bug bei der Ausgabe der Querschnittswerte im Brandfall bei unterschiedlichen Berechnungsmethoden behoben\\ - Gamma-Methode\\ - neue ETA Hasslacher\\ - NA FR\\ - Aufbauten Piveteaubois (HEXA1) | | |06.08.2018 | 6.9 | Full version, all company versions |- bug in the output of the material parameters fixed\\ - bug in the output of cross section values in case of fire for different calculation methods fixed\\ - Gamma method\\ - new ETA Hasslacher\\ - NA FR\\ - layups Piveteaubois (HEXA1) | |
| |19.09.2018 | 6.9.1 | Full version, all company versions |- neue Logos Hasslacher und Derix\\ - Einstellungen: Bug bei Auswahl Berechnungsmethode wenn Gamma nicht vorhanden, behoben | | |19.09.2018 | 6.9.1 | Full version, all company versions |- new logos Hasslacher and Derix\\ - preferences: bug with selection of calculation method if gamma is not available, fixed | |
| |08.10.2018 | 6.10 | Full version, all company versions |- Aufbauten best wood SCHNEIDER\\ - pdf-Bericht: Änderungen am Seitenlayout\\ - Ressourcen NL ergänzt\\ - Ausnutzungsgrade bei Schwingungen\\ - Bug bei Anzeige der Ausnutzungsgrade im Brandfall im Schnittgrößenmodul behoben\\ - Bug im CSInputPanel bei Brand und automatischer Berechnung behoben | | |08.10.2018 | 6.10 | Full version, all company versions |- layups best wood SCHNEIDER\\ - pdf report: changes to the page layout\\ - resources NL completed\\ - utilization ratios in case of vibrations\\ - bug in the display of utilization ratios in case of fire in the module "internal forces" fixed\\ - bug in CSInputPanel in case of fire and automatic calculation fixed | |
| |23.10.2018 | 6.10.1 | Full version, all company versions |- Material Radiusholz (nur in Testversion)\\ - Materialzuordnung HEXA1 T\\ - Einheiten bei Gebäudeaussteifung\\ - Winst,Q statt winst,G+Q bei NA FR | | |23.10.2018 | 6.10.1 | Full version, all company versions |- material Radiusholz (only available in the testing version)\\ - Material allocation HEXA1 T\\ - units in module "horizontal load distribution on shear walls"\\ - Winst,Q instead of winst,G+Q for NA FR | |
| |07.11.2018 | 6.10.2 | Full version, Derix |- Logo Derix | | |07.11.2018 | 6.10.2 | Full version, Derix |- logo Derix | |
| |08.11.2018 | 6.10.3 | Full version |- Material Binder | | |08.11.2018 | 6.10.3 | Full version |- material Binder | |
| |22.11.2018 | 6.10.4 | Full version, all company versions |- w_fin und w_net,fin überarbeitet | | |22.11.2018 | 6.10.4 | Full version, all company versions |- w_fin and w_net,fin revised | |
| |14.12.2018 | 6.10.5 | Full version, all company versions |- Defaulteinstellung für Vernachlässigung Eigengewicht g0 geändert\\ - Bug bei Gamma-Methode, wenn Det=0 behoben | | |14.12.2018 | 6.10.5 | Full version, all company versions |- default setting for neglecting own weight g0 changed\\ - bug with Gamma method, if Det=0 fixed | |
| |17.01.2019 | 6.10.6 | Full version, all company versions |- Bug bei SLS NA FR behoben | | |17.01.2019 | 6.10.6 | Full version, all company versions |- Bug in SLS NA FR fixed | |
| |29.01.2019 | 6.10.7 | Full version, all company versions |- Übernahme SLS Limits in den Einstellungen (ohne Enter)\\ - Übersetzungen FR\\ - Bug bei wperm für Schwingungen nach DIN behoben | | |29.01.2019 | 6.10.7 | Full version, all company versions |- take over SLS limits in the settings (without pressing Enter)\\ - translation FR\\ - bug in wperm for vibrations according to DIN fixed | |
| |18.02.2019 | 6.10.8 | Full version, all company versions |- Name von MM geändert\\ - Querschnitt von Piveteaubois 3s 80 geändert\\ - Übersetzungen FR korrigiert\\ - Gebäudeaussteifung: Auswahl Produzenten eingebaut | | |18.02.2019 | 6.10.8 | Full version, all company versions |- Name of MM changed\\ - cross section of Piveteaubois 3s 80 changed\\ - translations FR revised\\ - horizontal load distribution on shear walls: selection of producers implemented | |
| |11.03.2019 | 6.10.9 | Full version, all company versions |- Gebäudeaussteifung: Auswahl Drehpunkt der Wand eingebaut\\ - Bug beim Öffnen von Piveteaubois-Aufbauten behoben | | |11.03.2019 | 6.10.9 | Full version, all company versions |- horizontal load distribution on shear walls: selection of center of rotation of a wall implemented\\ - fixed bug when opening a Piveteaubois layup | |
| |01.04.2019 | 6.11 | Full version, all company versions |- Binderholz entfernt\\ - Probleme beim Öffnen von manchen Modulen behoben | | |01.04.2019 | 6.11 | Full version, all company versions |- Binderholz removed\\ - file open problems fixed | |
| |02.04.2019 | 6.11.1 | Full version, all company versions |- Aufbauten-Bibliothek bearbeitet\\ - Effektive Breite für Steifigkeitskriterium EC5 bearbeitet (1m oder Raumbreite, wenn < 1m) | | |02.04.2019 | 6.11.1 | Full version, all company versions |- cross section library edited\\ - effektive width for the stiffness criterion EC5 edited (1m or room width, if < 1m) | |
| |23.05.2019 | 6.12 | Full version, all company versions |- Produktaktualisierung KLH\\ - Materialaktualisierung Stora Enso und Hasslacher\\ - Nutzungsbedingungen überarbeitet | | |23.05.2019 | 6.12 | Full version, all company versions |- products KLH updated\\ - material update for Stora Enso and Hasslacher\\ - terms of use revised | |
| |27.05.2019 | 6.12.1 | Full version, Hasslacher |- altes Material von Hasslacher entfernt | | |27.05.2019 | 6.12.1 | Full version, Hasslacher |- old material of Hasslacher removed | |
| |13.06.2019 | 6.12.2 | Full version, Cross Timber Systems |- altes Material von Stora Enso entfernt\\ - Abbrandrate CTS auf seitenverklebt geändert\\ - Updateproblem Abbrandrate behoben | | |13.06.2019 | 6.12.2 | Full version, Cross Timber Systems |- old material of Stora Enso removed\\ - charring rate CTS changed to side bonded\\ - update problem charring rate fixed | |
| |18.07.2019 | 6.12.3 | Full version, all company versions |- überarbeitete Nutzungsbedingungen FR\\ - NA FR: w2 geändert - Anteil von g1,k als fragil\\ - Derix-Aufbauten L100-5s, L110-5s, L120-5s hinzugefügt | | |18.07.2019 | 6.12.3 | Full version, all company versions |- revised terms of use FR\\ - NA FR: w2 changed - amount of g1,k as fragil\\ - Derix layups L100-5s, L110-5s, L120-5s added | |
| |27.09.2019 | 6.13 | Full version, all company versions |- PDF-Bericht - Problem mit Leerseite nach dem Inhaltsverzeichnis behoben\\ - KLH-Material überarbeitet\\ - MM - Anpassung ETA (Material und Brand)\\ - Bug bei Abbrandraten nach Öffnen behoben | | |27.09.2019 | 6.13 | Full version, all company versions |- PDF report - problem with empty page after TOC fixed\\ - material of KLH revised\\ - MM - adjustment according to ETA (material and fire)\\ - bug in charring rates after file opening fixed | |
| |16.10.2019 | 6.13.1 | Full version, MM |- MM: Seitenverhältnis der Lamellen t/a = 4, Default-Rechenmethode GAMMA | | |16.10.2019 | 6.13.1 | Full version, MM |- MM: ration board thickness to width t/a = 4, default calculation method GAMMA | |
| |07.01.2020 | 6.14 | Full version, Derix |- Derix: neue ETA und Aufbauten, Kleberauswahl PUR/MUF | | |07.01.2020 | 6.14 | Full version, Derix |- Derix: new ETA and layups, selection of adhesive PUR/MUF | |
| |03.02.2020 | 6.14.1 | Full version |- Produzentenauswahl korrigiert\\ - Material NORDIC-1950Fb-No.3 angepasst | | |03.02.2020 | 6.14.1 | Full version |- selection of producers revised\\ - material NORDIC-1950Fb-No.3 edited | |
| |13.02.2020 | 6.14.2 | Full version, all company versions |- Bugs Branddaten beim Umschalten der Produzenten korrigiert | | |13.02.2020 | 6.14.2 | Full version, all company versions |- fixed bugs regarding fire data when switching producers | |
| |09.03.2020 | 7.0 | Full version, all company versions |- Modul SHERPA CLT-Connector\\ - Materialbibliothek | | |09.03.2020 | 7.0 | Full version, all company versions |- module SHERPA CLT-Connector\\ - material library | |
| |24.03.2020 | 7.0.1 | Full version, Cross Timber Systems, Hasslacher, MM |- Modul Rippendecke: Bug beim Bericht erstellen behoben | | |24.03.2020 | 7.0.1 | Full version, Cross Timber Systems, Hasslacher, MM |- module ribbed slab: fixed bug when generating pdf report | |
| | |01.05.2020 | 7.0.2 | Full version |- best wood SCHNEIDER removed | |
| | |11.05.2020 | 7.0.3 | Full version, all company versions |- new certificate\\ - fixed bug regarding cross-section library in case of fire | |
| | |27.05.2020 | | Cross Timber Systems |- deleted | |
| | |28.05.2020 | 7.0.4 | Full version |- Cross Timber Systems removed\\ - rho_mean of material Stora Enso changed | |
| | |13.07.2020 | 7.0.5 | Full version, Cross Timber Systems |- Cross Timber Systems added | |
| | |16.07.2020 | 7.0.6 | Full version, all company versions |- fixed bug regarding shown results in detail for shear analogy & fire | |
| | |25.09.2020 | 7.1 | Full version, all company versions |- module continuous beam: fixed bug regarding concentrated loads near supports | |
| | |03.12.2020 | 7.2 | Full version, all company versions |- ETA-09/0036 of 2.9.2020\\ - Fire revised\\ - fixed inconsistencies regarding ksys and 1/ksys\\ - problem with gamma method using different materials in cross section solved\\ - highlighting special layup Derix | |
| | |18.12.2020 | 7.2.1 | Full version, all company versions |- fixed bug in the pdf report regarding cross-section values | |
| | |15.03.2021 | 7.3 | Full version, all company versions |- Piveteaubois: changed densities\\ - NA FR: ULS fire - additional combinations\\ - Straightness factor β<sub>c</sub> added to the settings\\ - Hasslacher: new material CL26E11.8 according to ETA-12/0281 of 09.11.2020 | |
| | |04.06.2021 | 7.4 | Full version, all company versions |- Cross Timber Systems removed\\ - module CLT-Plate 1D - Internal forces: bug in cross-section values in pdf file fixed (with SAV and Gamma method)\\ - Short summary\\ - Hasslacher: layerwise material selection (for t<sub>i</sub> ≥ 40 mm CL26E11.8 and CL36E14.7 according to ETA-12/0281 of 09.11.2020 available)\\ - Optimizer: Bug with temp file name under Windows fixed | |
| | |22.07.2021 | 8.0 | Full version |- module wall | |
| | |10.12.2021 | 8.1 | Full version, all company versions |- Decker: new layups\\ - fixed bug showing fire details for company products after opening an old file\\ - fixed bug in the pdf report when short cantilevers were neglected\\ - fixed bug in the calculation of the shear stiffness of 3s in the weak direction\\ - fire: user-defined values of minimum residual layer thickness enabled | |
| | |16.12.2021 | 8.1.1 | Full version |- fire & Piveteaubois: falling-off layers also in case of walls | |
| | |20.12.2021 | 8.1.2 | Full version, Hasslacher, MM |- module T-Beam: default material rib GL24h - EN 14080 | |
| | |28.06.2022 | 8.2 | Full version, all company versions |- best wood SCHNEIDER included\\ - module wall: bug fixed in calculation of n<sub>xy</sub> torsion in case of fire\\ - module continuous beam: bug fixed for SAV & fire & only 1 longitudinal layer and 1 cross layer\\ - module CLT-Plate loaded in plane extended to Brandner & Dietsch et al. 2015\\ - modules ribbed slab and wall revised regarding speed | |
| | |20.07.2022 | 8.2.1 | Full version, all company versions |- modules wall and plate loaded in plane: bug fixed for fire (falling off of charred layers, minimum thickness) | |
| | |29.09.2022 | 8.3 | Full version, all company versions |- fire: fixed bug when switching from company product to user-defined; added 2nd charring rate for Hasslacher | |
| | |28.02.2023 | 8.3.1 | Decker |- Upgrade company version: concentrated loads, wall without openings, horizontal load distribution on shear walls | |
| | |12.07.2023 | 8.4 | Full version, all company versions |- materials revised\\ - Piveteaubois: shear wall proofs modified\\ - NA FR: calculation of wfin - winst,G revised\\ - pdf protection removed\\ - module wall: kmod bug when switching languages fixed, display bug for boundary conditions after opening fixed, display problem of VM forces fixed, bug when updating buckling length factor fixed\\ - preferences: calculation of self-weight with rho_mean of material set to default\\ - fire: bug at pdf short summary fixed\\ - module ribbed slab: bug at material of new glulam lamellas fixed, option "standard dimensions only" added\\ - fire & Gamma method: fixed bug with external cross layers\\ - module "internal forces": display bug of details after completely burned fixed\\ - bug in interaction of CS & material libraries fixed\\ - company version Derix: activation of additional modules | |
| | |28.07.2023 | 8.4.1 | Full version, all company versions |- bug with languages fixed\\ - NA FR: calculation of wfin - winst,G revised | |
| | |18.08.2023 | 8.4.2 | Full version |- bug with ZSL-calculator and Piveteaubois products fixed | |
| | |20.09.2023 | 8.4.3 | Full version, all company versions |- NEN: WorkingLoadType.H set to SHORT\\ - NEN: Vibrations - choice of requirements with WarningDialog\\ - MM: additional layups\\ - fire: bug after file opening fixed | |
| | |29.09.2023 | 8.4.4 | Full version, all company versions |- vibrations: normal requirements - bug when opening the file fixed | |
| | |27.10.2023 | 8.4.5 | Full version, all company versions |- wall: bug after opening and changing cross section fixed | |